3 Series E93 328i (N52K) CONVER
To lift out the convertible top uniformly, make sure the special tool is aligned parallel to the roof module.
Lifting out roof module carefully and in stages with lifting gear.
Check freedom of movement of roof module with respect to body.
Carefully set roof module down on a suitable surface (e.g.
squared beams on pallet).
Replacement only:
Refer to Replacing roof module.
Set removed roof module down on inside of lid of transportation
crate and bolt down.
Change assembly carrier to new roof module and install roof
module in vehicle.
Set down removed roof module with assembly carrier from inside
of transportation crate and bolt down.
Remove assembly carrier.
Installation:
Check gap dimensions and if necessary adjust
Gauge coupling fastener.
Carry out diagnosis
RA Removing and installing roof module
BMW AG - TIS
06.02.2013 17:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
