bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

49 RA Removing And Installing_replacing Rear Window > < 48 RA Emergency Closing Hardtop|Page 2251
Page 7
background image

Fit special tool 54 0 162  on connection joint of hydraulic cylinder.

Tighten knurled screw (1).

Warning!

Risk of injury! The special tool can slip of if installed incorrectly. 

Take appropriate protective measures without fail. 

Cover sharp-edged areas.

Wear work clothing with long sleeves and protective gloves.

With the aid of an assistant, press down rear roof shell and convertible top compartment lid and lock coupling fastener

on left and right with special tool 54 0 162 .

Pull back coupling fastener over dead centre position.

Use Allen key to close shutoff valve on hydraulic unit.

Important!

The customer must no longer operate the convertible top after
it has been closed with the emergency closing procedure!

To prevent operation, remove fuse 12 for convertible top.

Place removed individual parts in vehicle.

The emergency closing procedure is now completed.

Installation:

Replace screws.

Screw on locking elements loosely.

Locking elements should still be able to be slid in order to centre
themselves.

Open convertible top.

Open convertible top compartment lid manually with wrench and
tighten down screws for rear locking elements.

Tighten down screws for front locking elements.

Add final details to vehicle.

RA  Emergency closing hardtop

BMW AG - TIS

12.02.2013  12:34

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 7 -

49 RA Removing And Installing_replacing Rear Window > < 48 RA Emergency Closing Hardtop|Page 2251