5 Series E34 518g (M43) TOUR
11 00 039
Checking compression of all cylinders (M40 /
M42 / M43 / M43TU / M44)
-
Read out fault memory of DME control unit
-
Check stored faults
-
Rectify faults
-
Clear fault memory
Caution!
High tension - mortal danger!
Interrupt power supply to ignition coils.
Follow instructions for checking compression pressure.
General instructions,
refer to Main Group 12.
Disconnect DME relay (K6300).
E36 installation location:
-
In file for:
-
Electrical Troubleshooting Manual
-
Component location index
E46 installation location:
-
Connect DIS Tester
-
Select Diagnosis
-
Carry out vehicle identification
-
Function selection
-
Component and signal function
-
Components
-
Relays
-
DME relay
-
Documents
-
Installation location (IL)
-
Displays
RA Checking compression of all cylinders (M40 / M42 / M43 / M43TU / M44)
BMW AG - TIS
15.01.2013 12:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -