5 Series E34 518g (M43) TOUR
Release deflection lever from generator carrier.
Installation:
Replace screw.
Tightening Torque,
refer to Technical Data 11 28 1AZ.
Note:
Note installation position.
The tensioning device for the drive belt is filled with oil and may
only be stored in a standing-up position.
If the tensioning device for the drive belt is in the wrong position, it
can generally be made free of air in the installation position by
pressing it together repeatedly.
Version with mechanical belt tensioner:
Caution!
The bolt connection (1) of the pulley for the tensioning device
for the drive belt has left-hand thread and is peened.
Only change the pulley in conjunction with the tensioning
device for the drive belt.
Loosen screws (1).
Loosen the screws (2) and remove with the tensioning device for
the drive belt.
Note:
If the screw (2) is inaccessable because of the lug (3), lock
the tensioning device for the drive belt using special
tool 11 3 340.
RA Replacing alternator drive belt tensioner (M43 / M43TU)
BMW AG - TIS
15.01.2013 12:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -