5 Series E34 518g (M43) TOUR
Secure crankshaft in TDC position with special tool 11 2 300.
Locate camshaft with special tool 11 3 190 in firing TDC position
of first cylinders.
Note:
Crankshaft and camshaft remain secured in position until
installation works have been completed.
Remove hub for vibration damper.
Remove timing case cover at bottom,
refer to 11 14 110.
Remove timing chain sprocket from camshaft.
RA Replacing timing chain (M43)
BMW AG - TIS
15.01.2013 12:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -