5 Series E34 518g (M43) TOUR
Pull off vacuum hoses.
Remove and seal hoses (8 and 9) from preheating element (a
small amount of coolant escapes).
Unscrew nuts (1 ... 4).
Pull off throttle-valve assembly.
Caution!
One throttle-valve setting is not possible. If incorrectly
handled, the throttle body must be replaced.
Installation:
Replace seals (6 and 7).
RA Removing and installing/sealing throttle body (M42, M43, M44)
BMW AG - TIS
15.01.2013 13:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -