5 Series E34 518g (M43) TOUR
Unscrew rear manifold support.
Remove idling speed control valve.
Unscrew bolts. Unscrew upper manifold section.
Installation:
Check that vacuum hose (1) is securely seated.
Lift upper manifold section until threaded pin (2) is exposed, then
turn counter-clockwise and lift off.
Installation:
Check for tight fit of vacuum hoses on the lower manifold
section.
RA Removing and installing/replacing all fuel injection valves (M42, M43 to 9/95)
BMW AG - TIS
15.01.2013 13:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -