5 Series E34 518g (M43) TOUR
Mount input flange.
By tightening the collar nut, adjust friction torque of input taper
roller bearing to 250 Ncm.
Calculate thickness of shim (A).
Secure dial gauge to special tool 33 1 411, place on special tool
33 1 412 and adjust dial gauge preload to 0 (zero).
Fitting special tool 33 1 412 to drive pinion. Install special tool
33 1 411 in housing.
Read value (Y) and note down e.g. Y = 0.60 mm.
Example:
RA Replacing drive pinion with crown wheel (Type G) - final drive removed -
BMW AG - TIS
15.01.2013 13:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -