5 Series E34 518i (M43) SAL
Apply a thin coating of grease to top side of rubber profile gasket
and both sides of special tool 11 2 330.
Place special tool 11 2 330 on top side of rubber profile gasket.
Fit gear case.
Install and tighten all screws.
Carefully pull out special tool 11 2 330.
Assemble engine.
RA Removing and installing, sealing or replacing bottom timing case (M43 / M43TU)
BMW AG - TIS
17.01.2013 12:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -