5 Series E34 518i (M43) TOUR
![background image](/bmw/5_Series_E34/518i_M43_TOUR/page-272001.png)
33 11 731
Replacing both bearings in final drive case
(Type K) - final drive removed -
Remove final drive,
refer to 33 10 010.
Secure final drive to special tool 33 1 010.
Drain off fluid.
Take off case cover.
Installation:
Replace seal. Tightening Torque,
refer to Technical Data 33 11 1AZ.
Topping up oil. Oil quantity,
refer to Technical Data.
Oil grades,
refer to BMW Service Operating Fluids.
Press off drive flange with pry bar.
Mark bearing cap with punch marks and remove.
Caution!
In order to make friction torque adjustments easier, ensure
that the bearing caps and spacer discs are not mixed up.
RA Replacing both bearings in final drive case (Type K) - final drive removed -
BMW AG - TIS
18.01.2013 01:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -