5 Series E34 520i (M50) TOUR
Removing valves (M50 VANOS)
Assembly board: Fit special tool 11 1 441 from below in
assembly fixture:
Install special tool 11 1 065.
Secure with studs.
Holder: Screw on special tool 11 1 051.
Pressure lever: special tool 11 1 068 with pressure basket:
special tool 11 1 052 and guide rod: Fit special tool 11 1 067.
Compress valve springs and take out valve collets.
Compress valve springs and remove valve collets.
Take tray out of assembly fixture from below and pull out valve.
RA Removing valves (M50 VANOS)
BMW AG - TIS
19.01.2013 09:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -