5 Series E34 520i (M50) TOUR
Caution!
Before mounting the VANOS control unit, push back splined
shaft together with hydraulic plunger (1) in direction of housing
(2) as far as stop.
Installation:
Apply the VANOS control unit.
Turn splined shaft (1) until splines mesh.
Turn the sprockets with mounted chain counterclockwise far
enough that the splined shaft meshes in the splines of sprocket
(2).)
Caution!
It is absolutely essential to ensure that the "FIRST" suitable
tooth meshes.
Move VANOS control unit in direction of the cylinder head.
Guiding the bevel splined shaft into the bevel splined sprocket
causes the chain together with sprockets to be turned
counterclockwise.
Guide chain together with sprockets counterclockwise by hand.
RA Adjustment specification for camshaft (M50 VANOS)
BMW AG - TIS
19.01.2013 09:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
