5 Series E34 520i (M50) TOUR
11 21 501
Replacing crankshaft - crankshaft removed
(M50)
Note:
Replacement crankshafts are supplied complete with
corresponding main and connecting-rod bearing shells.
Crankshaft identification cast on crank cheek.
Engine M50 B20 = 66 mm stroke
Engine M50 B25 = 75 mm stroke
The crankshaft is surface treated and may only be reground in the
factory.
Reground crankshafts are marked with stripes of paint,
refer to Technical Data.
1 coat of paint: Size 1 (0.25 mm)
2 coats of paint: Size 2 (0.50 mm)
Cars with manual transmission:
Install guide bearing for transmission main shaft.
Drive in pilot bearing with special tool 11 2 030 in conjunction
with special tool 00 5 500 (handle).
RA Replacing crankshaft - crankshaft removed (M50)
BMW AG - TIS
19.01.2013 09:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -