5 Series E34 520i (M50) TOUR
Preload tensioning rail with special tool 11 3 390 by rotating the
adjusting screw with special tool 00 9 250 or standard torque
wrench to 1.3 Nm.
Tighten sprocket on exhaust camshaft in two passes.
Tightening torque,
refer to Technical Data 11 31 3AZ
Remove special tool 11 3 240.
Remove special tool 11 2 300.
RA Removing and installing or replacing VANOS adjustment unit (M50)
BMW AG - TIS
19.01.2013 10:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
