5 Series E34 520i (M50) TOUR
12 14 520
Replacing impulse sensor on vibration
damper (M50, M50 VANOS)
Switch off ignition.
Function description, Bosch DME
-
Design: inductive sensor.
-
Differiated coding of sensor plug-in connection to prevent
confusion with the Siemens engine control unit sensor MS
40.
-
Fault memory in DME control unit.
-
Troubleshooting - refer to Electrical Troubleshooting Manual.
Description for Siemens MS 40 Control Unit:
-
Design: angle-pulse sensor.
-
Sensor receives high frequency voltage from the control unit.
Phase displacement between the input and the output signal
is evaluated by the control unit.
-
Fault memory in MS 40 control unit.
-
Troubleshooting, refer to Electrical Troubleshooting Manual.
M50:
Pull off connector (3).
1 = Plug connection on oil pressure switch
2 = Sensor for cylinder recognition
3 = Impulse sensor on vibration damper
RA Replacing impulse sensor on vibration damper (M50, M50 VANOS)
BMW AG - TIS
19.01.2013 10:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -