5 Series E34 520i (M50) TOUR
12 14 525
Replacing sensor for cylinder recognition
(M50 direct ignition system)
Switch off ignition.
Function description, Bosch DME
-
Design: inductive sensor.
-
Only recognizes camshaft speed.
-
Differiated coding of sensor plug-in connection to prevent
confusion with the Siemens engine control unit sensor MS
40.
-
Fault memory in DME control unit.
-
Troubleshooting - refer to Electrical Troubleshooting Manual.
Description for Siemens MS 40 Control Unit:
-
Design: angle-pulse sensor.
-
This recognizes the rpm and position of the camshaft.
-
Position of camshaft is recognized even at speed 0.
-
Sensor receives high frequency voltage from the control unit.
Phase displacement between the input and the output signal
is evaluated by the control unit.
-
Fault memory in MS 40 control unit.
-
Troubleshooting, refer to Electrical Troubleshooting Manual.
Unscrew screw.
RA Replacing sensor for cylinder recognition (M50 direct ignition system)
BMW AG - TIS
19.01.2013 10:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -