bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Or Replacing All Injector Valves (M50,S50US)|Page 497 > < 1 RA Replacing Temperature Sensor For Coolant (M50,S50US)|Page 494
Page 1
background image

13 64 150

Removing and installing or replacing all
injector valves (M50,S50US)

Switch off ignition.

Unscrew cover on firewall.

Pull off rubber strips. Remove screws of cable channel.

Pull out cable channel.

Unfasten screws.

Remove cover for cylinder head cover.

RA  Removing and installing or replacing all injector valves (M50,S50US)

BMW AG - TIS

19.01.2013  10:47

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing Or Replacing All Injector Valves (M50,S50US)|Page 497 > < 1 RA Replacing Temperature Sensor For Coolant (M50,S50US)|Page 494