5 Series E34 520i (M50) TOUR
24 34 871
Replacing pulse generator (output or turbine
speed)
Remove valve body, refer to 24 30 006
Impulse sensor for output speed:
Pull off plug (1).
Remove screws (2 and 3).
Installation:
Tightening torque, refer to Technical Data 24 34 4AZ
Lift off pulse sender.
Caution!
Watch out for spacers (4 and 5).
Impulse sensor for turbine speed:
Pull off plug (1).
Remove screws (2 and 3).
Lift off pulse sender.
Installation:
Tightening torque, refer to Technical Data 24 34 4AZ
RA Replacing pulse generator (output or turbine speed)
BMW AG - TIS
19.01.2013 11:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -