5 Series E34 525i (M50) TOUR
Compress valve springs and take out valve collets.
Compress valve springs and remove valve collets.
Take tray out of assembly fixture from below and pull out valve.
Installation:
If one spring of the spring set (inner or outer spring) is
damaged or broken, both springs must be replaced.
Only use inner and outer springs of the same make and with the
same colour code.
Installation sequence:
1.
Valve
2.
Spring retainer, inner spring
3.
Valve-stem seal
4.
Spring retainer, outer spring
5.
Inner spring
6.
Outer spring
7.
Spring retainer, top
8.
Valve collets
Remove valve stem seal with special tool 11 1 250.
RA Removing valves (M50)
BMW AG - TIS
21.01.2013 06:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -