5 Series E34 525i (M50) TOUR
Pull off plastic cover for intake camshaft.
Rotate engine engine-wise until cam tips on intake and exhaust
camshafts on 1st cylinder face one another.
Pull dust guard out of the special tool bore.
Secure crankshaft in TDC position with special tool 11 2 300.
Caution!
Removing special tool 11 2 300 before starting engine.
RA Removing and installing or replacing VANOS adjustment unit (M50)
BMW AG - TIS
21.01.2013 06:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
