5 Series E34 525i (M50) TOUR
24 34 006
Removing and installing or replacing parking
lock (pawl/helical coiled spring)
Remove valve body, refer to 24 30 006
Remove holder (1) from housing.
Installation:
Tightening torque, refer to Technical Data 24 34 3AZ
Take off holder.
Installation:
Connecting rod (2) must engage in groove of locking lever (3).
Unscrew plug (4).
Installation:
Check seal (5), replacing if necessary.
Tightening torque, refer to Technical Data 24 11 4AZ
RA Removing and installing or replacing parking lock (pawl/helical coiled spring)
BMW AG - TIS
21.01.2013 07:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -