5 Series E34 525td (M51) TOUR
11 12 000
Removing and installing/sealing cylinder-
head cover (M51)
Removing intake filter housing,
refer to 13 71 000
Unscrew cover for intake manifold.
Unscrew cylinder head cover.
Installation:
Tightening sequence moving outwards.
Tightening torque,
refer to Technical Data 11 12 11AZ
Installation:
Apply coat approx. 2 mm high and 2 mm wide of Drei Bond
1209 sealing compound (refer to BMW Parts Service) to joints
beside O-rings between cylinder head and vacuum pump.
RA Removing and installing/sealing cylinder-head cover (M51)
BMW AG - TIS
23.01.2013 06:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -