5 Series E34 525td (M51) TOUR
11 22 500
Removing and installing or replacing flywheel
(M51)
Note:
clutch removed
Hold flywheel with Special Tool 11 2 170.
Unfasten screws and remove flywheel.
Installation note:
Clean thread and install new micro-encapsulated screws.
For tightening torque, refer to Technical Data 11 22 1AZ
Installation note:
Remember to fit hollow bush.
RA Removing and installing or replacing flywheel (M51)
BMW AG - TIS
23.01.2013 06:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -