5 Series E34 525td (M51) TOUR
23 11 612
Replacing guide tube for clutch controller
(S5D 200G/ 250G)
Necessary preliminary tasks:
•
Remove gearbox
•
Remove clutch controller and release lever from guide tube.
Release screws and remove guide tube.
Tightening torque: 23 11 2AZ
.
Installation:
Clean new guide tube. Guide surface must be completely
clean (no labels or residual adhesive, etc.).
Insert screws with Loctite 243 securing adhesive (sourcing
reference: BMW Parts Service).
RA Replacing guide tube for clutch controller (S5D 200G/ 250G)
BMW AG - TIS
23.01.2013 07:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
