5 Series E34 525td (M51) TOUR
Coat sealing lip of radial seal with ATF.
Attach special tool 23 2 380 to drive shaft.
Push on radial seal (1) up to housing.
Remove special tool 23 2 380 .
Drive in radial seal (1) with special tool 23 2 340 until flush.
Caution!
Use plastic hammer to drive in.
Install guide tube.
Tightening torque, 23 11 2AZ.
RA Removing and installing complete drive and output shafts (S5D 260Z / 310Z / 320Z
BMW AG - TIS
23.01.2013 07:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 18 -
