5 Series E34 525td (M51) TOUR
Remove spring (4) and arrester bolt (5).
Unscrew screws (1 and 2).
Drive dowel pin (1) out towards clutch case with a cotter pin
extractor.
Drive out cotter pin (2) with a cotter pin extractor.
RA Complete removal and installation of input and output shafts (S5D 200G/ 250G)
BMW AG - TIS
23.01.2013 07:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
