5 Series E34 525td (M51) TOUR
Install guide tube.
Install screws with Loctite 243 screw locking varnish.
Screw retaining compound, refer to BMW Parts Service.
Tightening torque,
refer to Technical Data 23 11 2AZ.
Secure reverse gear shaft in front case section.
Install screw (1) with Loctite 243 screw locking varnish and
tighten.
Screw retaining compound, refer to BMW Parts Service.
Tightening torque,
refer to Technical Data 23 11 6AZ.
Loosen screw (2) from special tool 23 2 400.
Remove front case section and gear train from special tool
23 2 400 and place to one side with output end uppermost.
Attach 4 rollers to the selector shaft with Vaseline.
RA Complete removal and installation of input and output shafts (S5D 200G/ 250G)
BMW AG - TIS
23.01.2013 07:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
