5 Series E34 525td (M51) TOUR
24 11 007
Removing and installing/sealing or replacing
both transmission oil pans (A4S 270R/310R)
Drain automatic transmission fluid.
Unscrew oil sumps.
Remove gaskets and clean sealing faces.
Note:
Bolts are micro-encapsulated and must be replaced after
each removal.
Position seals for oil sump.
Place magnet in large oil sump. Install oil sumps and insert all
screws until contact is made with screw head in each case.
Caution!
Do not tighten screws crosswise and do not tighten screws
any further.
Tighten down screws to torque in sequence in one pass.
Tightening Torque,
refer to Technical Data 24 11 5AZ.
Version with oil filler pipe:
Take out oil dipstick.
Caution!
Locking oil dipstick:
Tilt handle to unlock oil dipstick for removal.
RA Removing and installing/sealing or replacing both transmission oil pans (A4S 270
BMW AG - TIS
23.01.2013 07:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -