5 Series E34 525td (M51) TOUR
Mount intermediate plate (1) on intermediate housing (2).
Tighten screws diagonally and evenly with special tool 24 5 180.
Tightening Torque,
refer to Technical Data 24 11 13AZ.
Remove special tool 24 2 313.
Replace sealing rings of piston (1) and coat with petroleum jelly.
Attach special tool 24 2 314 to intermediate plate (1).
Press piston (2) into cylinder of intermediate plate (1) as far as it
will go.
Remove special tool 24 2 314.
RA Sealing intermediate plate (A4S 270R/310R)
BMW AG - TIS
23.01.2013 07:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
