5 Series E34 525td (M51) TOUR
Installation:
Replace O-rings.
To facilitate assembly, coat O-ring (1) with Vaseline.
Remove valve body with wire harness.
Installation:
Note dowel pin (1).
The spigot (3) on the selector lever must engage in the
groove of the slide valve (2).
Installation:
Insert dowel pin in the transmission case.
RA Removing and installing or replacing shift control unit (A5S 310Z)
BMW AG - TIS
23.01.2013 07:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
