5 Series E34 525td (M51) TOUR
Installation:
Install holder (10) with curved side facing solenoid valves.
Tightening torque, refer to Technical Data
Pull out solenoid valves.
Installation:
Solenoid valves are identical.
Remove solenoid valve (6).
Pull off plugs (1 and 2) and remove screw (3).
Take off holder (4).
Pull out solenoid valve.
Installation:
Install holder (4) with lightly curved side facing valve housing.
Identification: solenoid valve (6) has a white plug receptacle.
Tightening torque, refer to Technical Data
RA Replacing all solenoid valves
BMW AG - TIS
23.01.2013 07:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
