5 Series E34 525td (M51) TOUR
33 11 731
Replacing both bearings on final drive
housing (Type M) - final drive removed -
Remove final drive, refer to pertinent model Repair
Instructions microfiche beginning with 1985 models,
refer to 33 10 010
Secure final drive to special tool 33 1 010.
Drain oil and remove housing cover.
Installation:
Replace seal.
Tightening Torque,
refer to Technical Data 33 11 1AZ.
Topping up oil.
Oil quantity,
refer to Technical Data.
Oil grade,
refer to BMW Service Operating Fluids.
Remove complete final drive housing,
refer to 33 12 526.
Pry off drive flanges with a tire iron for this purpose.
Mark bearing cap with punch marks and remove.
Caution!
In order to make friction torque adjustments easier, ensure
that the bearing caps and spacer discs are not mixed up.
RA Replacing both bearings on final drive housing (Type M) - final drive removed -
BMW AG - TIS
23.01.2013 07:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
