5 Series E34 525td (M51) TOUR
64 50 ...
Leak testing with ultraviolet additives (UV
additives) (BMW leak-testing case)
Important!
It is absolutely essential to read and comply with the
equipment manufacturer's instructions for use provided in the
equipment case!
Read and comply with the instructions for use provided with
the special tool particularly with regard to accident prevention,
health protection and environmental protection.
Use only BMW-approved UV-additives (e.g. TRACER).
Only the basic procedure is described in the following!
Warning!
Avoid contact with refrigerant.
Follow safety precautions when handling refrigerant.
Important!
UV lamp gets very hot in the radiation area!
Do not use the UV lamp without the filter glass.
Eyes and skin will suffer damage if the UV lamp is used
without the filter glass.
When using the UV lamp, wear the protective goggles
provided in the case.
Note:
•
Fill the hose system of the hand pump completely with UV
additive PRIOR to use
•
Use the UV additive exclusively for BMW-approved
refrigerant oils
•
Do not operate the A/C system while the hand pump is
connected or in use
•
The A/C system must always be filled with an adequate
amount of refrigerant to enable the leak-detecting agent to be
properly distributed
RA Leak testing with ultraviolet additives (UV additives) (BMW leak-testing case)
BMW AG - TIS
23.01.2013 08:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
