5 Series E34 525td (M51) TOUR
64 52 001
Replacing drive belt for compressor on air
conditioner (M40, M41, M42, M43, S50, M51)
Note:
If the drive belt is to be reused, mark direction of travel and
reinstall drive belt in same direction of rotation.
Remove underbody protection,
refer to 51 47 490
Unfasten screw (1) and remove drive belt from compressor.
Installation:
Check drive belt for coolant and oil residue and replace if
necessary.
Caution!
It is essential to replace drive belt if it comes into contact with
hydraulic fluid.
Installation:
Unfasten screw (1) until tensioning roller rotates without
friction. Press the tensioning roller on cap hex (2) with
Torque,
refer to Technical Data 64 52 3AZ
Press against drive belt, brace and tighten down screw (1).
RA Replacing drive belt for compressor on air conditioner (M40, M41, M42, M43, S50,
BMW AG - TIS
23.01.2013 08:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
