5 Series E34 525td (M51) TOUR
86 10 ...
Removing rear supports and bracket
Release screws (1) and remove rear support (2) from bracket (3).
Installation:
Tightening Torque,
refer to Technical Data 86 10 26AZ.
Remove cable holders (1) from bracket (2). Release screws (3) on
left and right sides of bracket (2). Drill out rivets (4) from underside
of platform. Drill out rivets (5) from upper side of platform.
Installation:
Tightening Torque,
refer to Technical Data 86 10 27AZ.
Installation:
Feed cable for rear light (1) through opening (2). Fit cable
holders (4) in holes (3).
RA Removing rear supports and bracket
BMW AG - TIS
23.01.2013 08:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
