bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

22 RA Removing Roof Railing Adapter > < 20 RA Removing Plug For Inside Light|Page 1281
Page 1
background image

86 21 ...

Removing roof railing

Note:

The text describes how to remove the roof railing at one
mounting point as an example. Proceed in the same way for
the other mounting points.

Open cover (1) and fold down.

Unscrew bolt (1).

After releasing three retaining screws, lift off roof railing (2).

Installation:

Check molded sealing parts for faults and replace if
necessary. Pay attention to identification of molded sealing
parts and position accordingly.

Check butylene tape seal.

Use new screws. Coat all screws with OKS 90 thread locking
adhesive.

First screw down railing adapter in middle. Then press roof
railing downwards with a force of approx. 50 N. Then screw
down railing adapter at front and rear.

Tightening Torque for roof railing at front and rear,

refer to Technical Data 86 21 1AZ.

Tightening Torque for roof railing in middle,

refer to Technical Data 86 21 2AZ.

RA  Removing roof railing

BMW AG - TIS

23.01.2013  08:52

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

22 RA Removing Roof Railing Adapter > < 20 RA Removing Plug For Inside Light|Page 1281