5 Series E34 525td (M51) TOUR
Two different types of spacers (2) are available for each Camloc
fastener (1): one thick and one thin. You can fit one, two or no
spacer (2) on the Camloc fastener (1).
Access to hood lighting plug (1):
Right side lid.
Open out spring-loaded cap (2) on socket (3) and remove hood
lighting plug (1). Close cap (2). Insert hood lighting plug (1) into
plug receptacle (4).
Unlocking Camloc fastener:
Wing (1) of Camloc fastener (2) is parallel to outer edge of
hood. Turn Camloc fastener (2) counterclockwise until it is heard
and felt to unlock.
Locking
Press hood in lid frame downwards by hand. Turn Camloc
fastener clockwise until it is heard and felt to lock into place.
Wing (1) of Camloc fastener is parallel to outer edge of hood.
Raise hood and place block (1) between centering pin (2) and
platform. Lower hood and position centering pin (2) on block (1).
RA Adjusting hood pretension - Camloc fastener with spacers
BMW AG - TIS
23.01.2013 08:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
