5 Series E34 525td (M51) TOUR
33 12 Crown wheel with pinion and bearing (Type K, M, G)
Type
Thread
Tightening specification
Measure
1AZ Crown wheel on final drive housing
Keep screws and threads clean and
free from oil and grease
Use screw locking varnish
E30 / E31 /
E32 / E34 /
E36 / E38
M10
Replace screws
Jointing torque
50 + 3
Nm
Torque angle
40 + 3
°
E30 / E31 /
E32 / E34 /
E36 / E38
M12 x 1.5
Replace screws
Jointing torque
100
+ 10 Nm
Torque angle
50 + 5
°
E30 / E31 /
E32 / E34 /
E36 / E38
M14 x 1.5
Replace screws
Jointing torque
100
+ 10 Nm
Torque angle
30 + 4
°
2AZ Input flange to drive pinion
Type K (Side cover with 4 bolts);
min.
E30 / E34 /
E36
M20
175 Nm
Type M (Side cover with 6 bolts);
min.
E31 / E32 /
E34 / E38
M20
185 Nm
Type G (Side cover with 8 bolts);
min.
E31 / E32 /
E34 / E38
M22
210 Nm
AZD Crown wheel with pinion and bearing (Type K, M, G)
BMW AG - TIS
23.01.2013 11:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
