bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 SBT Vacuum Supply All Models|Page 2039 > < 1 SBT All Publications - New Features And Archive 12_2007|Page 2037
Page 1
background image

VS-42 je

Baugruppe/Group: 11

11 02 05 (130)

weltweit

Datum/Date:
02/2005

Vacuum supply

All models

Introduction

Vacuum is principally used for the brake booster.
The vacuum in the inlet pipe depends on the varying engine load. 

Diesel engines do not normally have any vacuum in the inlet pipe. Vacuum on diesel engines is provided by a pump
that generates the required vacuum. 
On spark-ignition engines with Valvetronic, the throttle valve is almost always open when driving. This means that
there is a lower low air pressure in the intake manifold. 
Spark-ignition engines with low vacuum in the inlet pipe also have a pump that generates additional vacuum. 
[System overview ...]

Brief description of components

The following components are involved in the vacuum supply system: 

Mechanical vacuum pump

A mechanic vacuum pump is fitted to diesel engines and spark-ignition engines with Valvetronic.

The vacuum pump is mechanically driven by the engine, e.g. via the exhaust camshaft. 

Suction-jet pump

As a rule, the suction-jet pump boosts the vacuum in the inlet pipe.

[more ...]

SBT  Vacuum supply All models

BMW AG - TIS

23.01.2013  11:39

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 SBT Vacuum Supply All Models|Page 2039 > < 1 SBT All Publications - New Features And Archive 12_2007|Page 2037