5 Series E34 525td (M51) TOUR
13.4 Viewing and deleting customer entries from database
-
Call up the menu item "Delete" in the "Database" menu in the special functions. The data input screen will
appear. Fill in the search fields with the data to be deleted.
-
Use the "-" button to delete this data record. A new data record can then be highlighted and deleted with the
digital pen.
-
You can scroll through the entire database with the "Arrow up" and "Arrow down" keys.
-
You can quit the delete function by pressing the cancel key (red dot).
14. Modifications within program
Further modifications were carried out within the program which only slightly change the program sequence but which
optimise the alignment in respect of comfort and speed. This is described below:
-
Optimisation of the rim run-out compensation in respect of speed.
-
Optimisation of the steering routines: Highlighted values within the gate can still be corrected. The message "
Rotating plates not connected" no longer causes the steering routine to be cancelled. Further measurements
can be carried out after the rotating plates have been connected.
-
Standardisation of screen colours with the colours on the tablet.
-
Addition of texts in several foreign languages.
-
Elimination of program-related and cosmetic faults.
-
Electronic water level.
-
Omission of kingpin inclination measurement.
15. Faults
15.1 Tyre faults
Fault
Effect
1
Wheel toe, camber, toe-differential angle and castor
not correct
1
Severe tyre squeaking even at relatively low speeds
2
Excessive toe-in and excessive positive camber
2
Tyres are worn down on one outside edge in the
longitudinal direction
3
Excessive negative camber
3
Tyre wear on inside edge
4
Worn front-axle suspension on front-wheel-drive
vehicles
4
Increased noise /
Vehicle pulls on one side when accelerating
5
Incorrect wheel alignment
5
Wheels scrubbing /
Tyre surface shows feathering in the tread
6
Play in the suspension due to mechanical parts
(suspension, steering)
6
Washout /
Wobbling of front wheels
7
Tyre pressure too low
7
Outside tyre surface wear
15.2 Front axle faults
Fault
Cause
Remedy
SBT Kinematic Diagnosis System and environment BMW KDS (Beissbarth)
BMW AG - TIS
23.01.2013 11:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 20 -
