bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 SWS Recoding Of Spare Parts (housings And Contacts) From _Repair Set 4 For Vehicle E > < 2 SWS Cleaning Brush For Brake Pads Guide All Models
Page 1
background image

VS-14/Kauerauf

Register/Index: 2

2 05 07 (349)

Vertrieb D
KDL d. VGs u.
Imp. z.Info

Datum/Date:
02/2007

Adjustment tool for reversing camera (RFK)

BMW

Situation: 

With the launch of the E70, BMW is for the first time offering an optional reversing camera.
This reversing camera contains a number of driver assistance functions that appear in form
of various graphics in the real, electronically equalised video image on the Central
Information Display (CID). These graphic must agree geometrically with the world outside.

Because of the installation tolerances in the vehicle (suspension, tailgate and reversing
camera), it is essential for the reversing camera to be calibrated. The reversing camera can
only be calibrated via diagnosis (SGBD job). Manual adjustment is not possible. To
calibrate the reversing camera, a "visual target" must be correctly set relative to the
reversing camera. This target is a component of the adjustment tool.

In order to meet the high demands placed on calibrating the reversing camera, adjustment
(maximum target deviation 

±

0.5 cm in any direction) must be performed in the headlight or

ACC adjustment bay, or at a place with a similarly level surface. The requirements are
described in SI 020405208 Enclosure 1

.

The reversing camera must be calibrated after:

Removal/installation of reversing camera

Wheel alignment

Repair work on the body at the rear of the vehicle

Adjustment work on the tailgate

Note:

The instructions given in the respective repair instructions must always be
observed.

The reversing camera adjustment tool is designed so that it will also be able to be used for
adjusting the reversing camera on later vehicle models.

For all information regarding the delivery specification and on assembling the reversing
camera adjustment tool, please refer to Enclosure 1 .

Procedure:

The reversing camera adjusting tool will only be supplied to order. Orders can be placed
online at www.bmwgroup-wep.com or to Cartool.

SWS  Adjustment tool for reversing camera (RFK) BMW

BMW AG - TIS

23.01.2013  12:42

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 SWS Recoding Of Spare Parts (housings And Contacts) From _Repair Set 4 For Vehicle E > < 2 SWS Cleaning Brush For Brake Pads Guide All Models