5 Series E34 525tds (M51) SAL
new control unit.
To further mark control units that have been modified in this manner (in addition to the
Bosch sticker and the seal), attach the enclosed extra sticker to the lid of the control unit
(see figure 2).
Figure 2:
Sticker for EGS control unit (enlarged)
b)
If there is no entry in the DDE fault memory or the fault "slide travel sensor
(potentiometer setting)" is present,
- check the version of the distributor-type fuel-injection pump
If the production code of the distributor-type fuel-injection pump is lower than 467 (see
Item C in figure 3), replace the distributor-type fuel-injection pump in addition to the
scope of components to be replaced in accordance with 2a.
Figure 3: Nameplate of the fuel-injection pump
C = Production code
SI Fault "106 MUX" in EGS E34 E36 M51
BMW AG - TIS
23.01.2013 18:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -