5 Series E34 540i (M60-2) TOUR
Note:
Main bearing cap no. 5 can be identified by the recesses for
the stop disks of the thrust bearing.
Insert stop disks on both sides into grooves of main bearing cap
no. 5.
Lubricate crankshaft and main bearing shells.
Position main bearing caps (1 ... 5) so that the retaining
grooves of the main bearing shells are on one side.
Align main bearing cap flush with side of bearing seat.
Note:
The main bearing cap screws must always be replaced by
new ones.
Do not wash off screw coating.
No oil is permitted in the blind bores! (risk of cracking).
RA Replacing main crankshaft bearing shell (M60)
BMW AG - TIS
28.01.2013 02:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -