5 Series E39 520d (M47) SAL
Installation:
Sealing faces clean and free of seal debris.
Check gasket, replace if necessary.
Apply Drei Bond 1209 sealing compound to area around
joint (refer to BMW Parts Service): approx. 3 mm wide and
2 mm high.
Installation:
To prevent any possibility of torsion stress during subsequent
transmission assembly, align oil pan flush with side of
transmission.
RA Removing and installing, sealing / replacing oil sump (M47)
BMW AG - TIS
22.01.2013 22:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -