5 Series E39 520d (M47) SAL
32 41 380
Removing and installing or replacing oil
cooler/cooling coil for power steering (M47)
Caution!
After installation, bleed power steering.
Make sure all parts are absolutely clean.
No dirt is allowed to enter the system.
Recycling:
Draw hydraulic fluid out of container and do not reuse.
Observe country-specific waste-disposal regulations.
Release hose clamps (1) and remove turbocharger hose.
Remove fan impeller and fan cowl.
Detach lines (1) on oil cooler.
Remove rubber gasket (2).
Carefully press oil cooler (3) out of mountings.
RA Removing and installing or replacing oil cooler/cooling coil for power steering
BMW AG - TIS
23.01.2013 01:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -