5 Series E39 520d (M47) SAL
34 00 012
Parking brake function check
Note:
If deviations are identified during the following check, the
parking brake must be adjusted:
Drive vehicle onto chassis dynamometer.
Warm up brakes.
Check handbrake.
0th tooth (handbrake released):
Vehicles with manual transmission: Shift lever in neutral
position.
Vehicles with automatic transmission: Selector lever in "N"
position.
-
Without locking differential
≤
150 N.
-
With locking differential
≤
200 N (possibly odd display).
1st tooth: No increase in braking force with regard to 0th tooth.
Indicator lamp can be lit.
2nd tooth: Indicator lamp must be lit.
3rd tooth: Increase in braking force.
5th tooth: The brake force display must have reached
≥
400 N.
Checking brake force differential at wheel:
Apply handbrake until a wheel circumferential force (measured on
brake test stand) of min. 1000 N is reached.
Max. permitted brake force differential right/left
≤
35 % (referred
to greater brake value).
It must be possible to brake with locked wheels with the
handbrake.
RA Parking brake function check
BMW AG - TIS
23.01.2013 02:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -