5 Series E39 520d (M47) SAL
34 31 500
Removing and installing / replacing the
master brake cylinder
Remove brake device,
refer to 34 33 505.
Unfasten nuts and remove master brake cylinder from brake unit
Installation:
Replace self-locking nuts.
Tightening torque,
refer to Technical Data 34 31 1AZ.
Installation:
Replace O-ring.
RA Removing and installing / replacing the master brake cylinder
BMW AG - TIS
23.01.2013 02:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -