5 Series E39 520d (M47) SAL
51 31 200
Removing and installing rear window
Note:
When gluing the rear window, glues for cold and hot
processing are permitted.
Cover rear side panels with protective covers.
Removing and installing both trim pieces for rear roof pillar,
refer to 51 43 251.
Cold processing:
Comply with instructions on gluing windows,
refer to 51 31 ...
Warm processing:
Open rear end of aluminum membrane in cartridge before
installing in cartridge oven.
Heat glue cartridges to 80
°
C for one hour in oven (sourcing
reference: BMW Parts Service).
Comply with instructions on gluing windows,
refer to 51 31 ...
Disconnect right plug connection (1) (wave trap).
RA Removing and installing rear window
BMW AG - TIS
23.01.2013 04:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -