5 Series E39 520d (M47) TOUR
Remove plug (1) of alignment bore from crankcase.
Open oil filler neck.
Crank engine in direction of rotation until cast lug (1) on inlet
camshaft points upwards.
Note:
Cast lug (1) on inlet camshaft points upwards at firing TDC,
cylinder 1.
Caution!
Do not damage hexagon socket of plug for static basic
adjustment.
Unscrew plug for static basic adjustment (1).
Note:
Plug is located approx. 30 mm behind blocking screw.
Installation:
Replace sealing ring without fail.
Tightening torque,
refer to Technical Data 13 51 12AZ.
RA Checking injection pump measured value (M47)
BMW AG - TIS
23.01.2013 23:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -