5 Series E39 520i (M52) TOUR
Press out output shaft with special tools 33 2 111/116/117.
Installation:
Draw in output shaft with special tools 33 2 115/116/118.
Unfasten nut from traction strut (1) and control arm (2) on wheel
carrier - brace on hexagon if necessary.
Remove wheel carrier.
Installation:
Tapered pins and holes grease-free. Replace nuts.
Tightening torque,
refer to Technical Data 33 32 4AZ .
refer to Technical Data 33 32 8AZ .
RA Removing and installing a steering knuckle/wheel carrier (touring)
BMW AG - TIS
03.02.2013 19:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -